Home / Products / Access OTN / Access OTN CPE / 10G/1G L2 packet switching
10G/1G L2 packet switching

STN6200-L2X8M


STN6200-L2X8M is a 1U half-brick box 10G OTN Muxponder with Ethernet switching function. It adopts industry-leading chip technology and fully supports international standards (such as ITU-T G.709, G.798). etc). STN6200-L2X8M supports 2-ports OTU2 line interface. The client side is 8-ports SFP interface that support 6-ports GE/FE packet service and 2-ports STM-1/STM-4/STM-16/GE/FE transparent service, it is suitable for the optical transmission network application and metro access application.

Overview

STN6200-L2X8M is a 1U half-brick box 10G OTN Muxponder with Ethernet switching function. It adopts industry-leading chip technology and fully supports international standards (such as ITU-T G.709, G.798). etc).

STN6200-L2X8M supports 2-ports OTU2 line interface. The client side is 8-ports SFP interface that support 6-ports GE/FE packet service and 2-ports STM-1/STM-4/STM-16/GE/FE transparent service, it is suitable for the optical transmission network application and metro access application.

Features

Item

Description

Frame size (mm)

242mm*220mm*44mm (width * depth * height)

Power supply

AC input: 100VAC240VAC, 4763Hz

Support +/-6KV (common mode/differential mode) lightning surge protection

Support equipment power failure alarm reporting

Client side interface

6 GE/FE ports for packet service and 2 STM-1/4/16/GE/FE ports transparent service.

Line side interface

2 SFP+ ports based OTU2

Operating environment

Working temperature: -10C55C

Storage temperature: -40C70C

Relative humidity: 5%95%, non-condensing

Installation Environment

Support standard 19inch/21inch/23inch rack (via special tray) or desktop or wall mounting

Typical power consumption

50W

Technical Specification

Item

Description

System side signal and multiplexing structure

WDM port:

OCh <-> OTU2 <-> ODU2 <-> ODU1 or ODU0 or mixed ODU0/ODU1

Grey port:

OTU2 <-> ODU2 <-> ODU1 or ODU0 or mixed ODU0/ODU1

Client side signal and mapping method

FE (via GMP or GFP-F) <-> ODU0

GE (via GMP+TTT/GFP-T or GFP-F) <-> ODU0

STM-1/STM-4 (via GMP)  <-> ODU0

STM-16 (via AMP or BMP) <-> ODU1

FEC

OTU2: G.709 GFEC or EFEC I.4 or EFEC I.7

In-band management

GCC0 on OTU2

GCC1 or GCC2 or GCC1+2 on ODU2 or ODU1

GCC1 or GCC2 or GCC1+2 on ODU0

Out-band management

Support 10M/100M/1000M full duplex Ethernet port

Transmission protection

SNC/N, SNC/I, SNC/SOCh1+1

LAG1+1

Ethernet Private Line (EPL) service

Support Ethernet Private Line (EPL) service

Ethernet Virtual Private Line (EVPL) service

Support multiple Ethernet layer 2 business aggregation

Support Ethernet service layer 2 forwarding

LAG function

Support Ethernet port aggregation

Flow control function

Support flow control based on IEEE 802.3x

QoS function

Support QoS function based on port or port + VLAN service

Speed limit function

Support speed limit function based on port or port + VLAN service

Ethernet OAM

Support performance monitoring and alarm monitoring and reporting of Ethernet services