Home / Products / Access OTN / Access OTN CPE / 10G Access Muxponder
10G Access Muxponder
STN6200-M2X8

STN6200-M2X8 is a 1U half-brick box 10G OTN Muxponder,It adopts industry-leading chip technology and fully supports domestic and international standards (such as ITU-T G.709, G.798). etc). STN6200-M2X8 supports 2-ports OTU2/2e or OTU1 line interface and 8-ports 2.5G any rate client interface, which is suitable for metro access and metro convergence optical transmission network.

Overview

STN6200-M2X8 is a 1U half-brick box 10G OTN MuxponderIt adopts industry-leading chip technology and fully supports domestic and international standards (such as ITU-T G.709, G.798). etc).

STN6200-M2X8 supports 2-ports OTU2/2e or OTU1 line interface and 8-ports 2.5G any rate client interface, which is suitable for metro access and metro convergence optical transmission network.

Features

Item

Description

Frame size (mm)

242mm*220mm*44mm (width * depth * height)

Power supply

AC input: 100VAC240VAC, 4763Hz

Support +/-6KV (common mode/differential mode) lightning surge protection

Support equipment power failure alarm reporting

Client side interface

8 SFP based GE/FE/STM-1/4/16

Line side interface

2 SFP+ based OTU2(2e) or SFP based OTU1

Operating environment

Working temperature: -10℃55

Storage temperature: -4070

Relative humidity: 5%95%, non-condensing

Operating environment

Support standard 19inch/21inch/23inch rack (via special tray) or desktop or wall mounting

Typical power consumption

40W

Technical Specification

Item

Description

System side signal and multiplexing structure

10G WDM port:

OCh <->OTU2<->ODU2<->ODU0 or ODU1 or mixed ODU0/ODU1 or

OCh <-> OTU2/2e <-> ODU2/2e or

OCh <-> OTU1 <-> ODU1 <-> ODU0 or

OCh <-> OTU1 <-> ODU1

10G grey port:

OTU2 <-> ODU2 <-> ODU0 or ODU1 or mixed ODU0/ODU1 or

OTU2/2e <-> ODU2/2e or

OTU1 <-> ODU1 <-> ODU0 or

OTU1 <-> ODU1

Client side signal and mapping method

FE (via GMP or GFP-F) <-> ODU0

GE (via GMP+TTT/GFP or GFP-F) <-> ODU0

STM-1/STM-4 (via GMP) <-> ODU0

STM-16 (via AMP or BMP) <-> ODU1

FEC

OTU2/2e: G.709 GFEC or EFEC (I.4 or I.7)

OTU1: G.709 GFEC

In-band management

GCC0 on OTU2/2e or OTU1

GCC1 or GCC2 or GCC1+2 on ODU2/2e

GCC1 or GCC2 or GCC1+2 on ODU1

GCC1 or GCC2 or GCC1+2 on ODU0

Out-band management

Support 10M/100M/1000M full duplex Ethernet port

Transmission protection

SNC/N, SNC/I, SNC/S, OCh1+1