- My Order
- My Address
- Logout
+86 2167755355
.png?x-oss-process=image/resize,w_100/quality,q_100)
10G Tunable DWDM 80km SFP+
10G, Tunable, DWDM, 80km, SFP+
The 10 Gb/s SFP+ tunable transceiver is an integrated fiber optic transceiver that provides a high-speed serial link at signaling rates up to 11.3 Gb/s. The module complies with the 10 Gigabit Enhanced Small Form Factor Pluggable （SFP+）multisource agreement-MSA （SFF-8431） and SFF-8432， SFF-8690，SFF 8472. It complies with the ITU-T G.698.1 standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80 km reach (Ethernet), and DWDM 10GFC for 80 km reach (Fiber Channel) applications.
The 10 Gb/s SFP+ tunable transceiver is anintegrated fiber optic transceiver that provides a high-speed serial link atsignaling rates up to 11.3 Gb/s. The module complies with the 10 GigabitEnhanced Small Form Factor Pluggable （SFP+）multisource agreement-MSA （SFF-8431）and SFF-8432， SFF-8690，SFF 8472. It complies with the ITU-T G.698.1standard with 50 GHz channel spacing for SONET/SDH, IEEE DWDM 10GBASE-ZR for 80km reach (Ethernet), and DWDM 10GFC for 80 km reach (Fiber Channel)applications.
The transceiver integrates the receiver andtransmitter path on one module. The transceiver contains a C-band-tunableintegrated Mach-Zehnder (MZ) laser, enabling data transmission over single-modefiber through an industry-standard LC connector. On the receiver side, the 10Gbps data stream is recovered from an APD/ trans-impedance amplifier, andpassed to an output driver. This module features a hot-pluggable electricalinterface.
● Supports 9.95Gb/s to 11.3Gb/s bit rates
● Monolithically integrated full C-band tunable transmitter
● 50 GHz ITU channel spacing with integrated wavelength locker
● C-band-tunable Laser and APD receiver
● Maximum link length of 80km
● Full Duplex LC connector
● Hot-pluggable SFP+ footprint
● Supports Line-side and XFI loopback
● No Reference Clock required
● Built-in digital diagnostic functions
● Standard bail release mechanism
● Power dissipation <2.5W
● Case temperature range:0°C to 70°C
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Note |
|
Transmitter |
||||||
|
Average Optical Power |
Pout |
-1 |
|
3 |
dBm |
1 |
|
Frequency stability (BOL) |
|
ƒc -1.5 |
|
ƒc +1.5 |
GHz |
2 |
|
Frequency stability (EOL) |
|
ƒc - 2.5 |
|
ƒc +2.5 |
GHz |
2 |
|
Center Wavelength Spacing |
|
|
50 |
|
GHz |
3 |
|
Optical Extinction Ratio |
ER |
8.2 |
|
|
dB |
|
|
Side mode Suppression ratio |
SMSR |
35 |
|
|
dB |
|
|
Average Launch power of OFF transmitter |
POFF |
|
|
-30 |
dBm |
|
|
Output Eye Mask |
Compliant with IEEE 802.3ae |
|
||||
|
Receiver |
||||||
|
Rx Sensitivity with dispersion 0 ps/nm |
RSENS |
|
|
-23 |
dBm |
@9.95, 10.3, 10.5Gbps, BER=10^-12 |
|
|
|
|
-27 |
dBm |
@10.709Gbps, BER=10^-4 |
|
|
|
|
|
-27 |
|
@11.1Gbps, BER=10^-4 |
|
|
|
|
|
-26.5 |
|
@11.3Gbps, BER=10^-4 |
|
|
Rx Sensitivity with dispersion –400 to +1450 ps/nm |
|
|
|
-21 |
|
@9.95, 10.3, 10.5Gbps, BER=10^-12 |
|
|
|
|
-25 |
|
@10.709Gbps, BER=10^-4 |
|
|
|
|
|
-25 |
|
@11.1Gbps, BER=10^-4 |
|
|
|
|
|
-24 |
|
@11.3Gbps, BER=10^-4 |
|
|
Input Saturation Power (Overload) |
Psat |
-6 |
|
|
dBm |
|
|
Wavelength Range |
λC |
1480 |
|
1580 |
nm |
|
|
|
||||||
|
LOS De-Assert |
LOSD |
|
|
-27 |
dBm |
|
|
LOS Assert |
LOSA |
-36 |
|
|
dBm |
|
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
Notes:
1. Output power is power coupled into a 9/125 mm single-mode fiber.
2. ƒc refer toPage 2 the Frequency row of XGXP-DWT96-80D Wavelength Guide Table，and test condition is reflect power totransmitter lower than -27dBm.
3. Correspondsto approximately 0.4 nm.
● DWDM 10GBASE-ZR/ZW 10G Ethernet
● DWDM 80KM 10G Fiber Channel
● DWDM SONET OC-192 & SDH STM-64
Related Products
.png?x-oss-process=image/resize,w_100/quality,q_100)
Contact Us
Contact US
Product Information
Quantity
Unit
Piece
Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.